Photo Gallery
NEWSKY offers a wide range of services including product design, prototyping, machining, stamping tool manufacturing and stamping production, with the second plant providing injection mold manufacturing and injection molding. We have a team of highly skilled professionals to ensure high quality manufacturing solutions for our customers.
Bearing case - Deep drawing progressive stamping tool
This product is characterized by high precision requirements, there are 3 punching and bending on the drawing side, resulting in special requirements for the stamping tool structure, the die in the lower, the punch in the upper, or the die in the upper, the punch in the lower, such a structure requires the mold to have extremely high accuracy......In the end, our mold production is very stable and all sizes are within tolerances.
- Material: SUS304 T=0.8mm
- Outside diameter =40.6mm, height=15.75mm
- Tolerance：Inner diameter ±0.05，height ±0.07
- Mold structure：Deep drawing Progressive stamping tool
Architectural decoration parts - Progressive stamping die
This part length is 16.546inch, 2.772 width, and the development size is 583.2*89.85mm. The product has many shapes such as forming, bending, punching, etc. In order to meet the requirements of cost saving, the progressive stamping tool designed by us only takes three working steps, and the material utilization rate is as high as 98.6%...
- Material: Satin 20g T=0.0396inch
- Development size is 583.2*89.85mm
- Tolerance：±0.15mm
- Mold structure：Deep drawing Progressive stamping tool
Automobile stamping mould
It's a part of a car door. The mold adopts the design of 2 CAVITY, the progressive stamping tool structure is compact, the layout is reasonable, and the mold is qualified after the completion of the mold, saving 22 days for the customer.
- Material: DC01 T=2.5mm
- Material size is W182*P26mm
- Tolerance：±0.10mm
- Mold structure：2 cavity Progressive stamping tool
Automotive engine heat exchanger components - Cold forming stamping tool
This is a key part of the automotive engine heat exchanger, the main difficulty of the product is that there are 2 O-grooves, the outer diameter of 32mm, the inner diameter of 20mm, the groove depth of 2.5mm, for placing the O-ring. The back of the groove can not be flat, and the flatness of the whole product is required to be within 0.15. This is a difficult product, but we completed the stamping tool and size adjustment in only 2 months.
- Material: Aluminum3003 T=4.5mm
- Material size is W165*P138.5mm
- Tolerance：±0.10mm
- Mold structure：Cold forming Progressive stamping tool